AriCell 3.6 Volt C 8500 mAh (LS26500 and ER26500) Primary Lithium Battery

SKU:23068
$21.69
1
Qty. Price
1 - 3 $21.69 each
4 - 7 $20.89 each
8 - 15 $20.29 each
16 - 31 $19.79 each
32 - 63 $19.09 each
64 - 127 $18.39 each
128 + call for pricing

Product Specifications

Specifications

  • Size: C
  • Capacity: 8500 mAh
  • Chemistry: Lithium Thionyl Chloride (Li-SOCI2)
  • Voltage: 3.6 Volt
  • Brand: AriCell
  • UL Approved

Electrical Characteristics

  • Nominal Capacity 9Ah ( 9000 mAh)
  • Open Circuit Voltage (at +20C +68F) 3.66V
  • Nominal Voltage (at 1mA +20C +68F) 3.6V
  • Pulse Capability: Typically up to 200 mA
  • Max. Continuous Current: 100mA Max
  • Pulse Current: 200mA
  • Storage (recommended):+30C +86 F max
  • Operating Temperature Range: -55C / +85C
  • Self discharge is low at less than 1% per annum at +68F, giving an effective shelf life of 10 years.
  • Diameter (max): 26.2 mm (1.02 in)
  • Height (max): 50.5 mm (1.98 in)
  • Typical Weight: 52 g (1.8 oz)

Equivalent Batteries

  • LS26500, LS26500C, TL-4920, TL-5920, TL-2200,
  • SB-C01, SB-C02, SL-770, XL-140F, XL-145F, PT-2200

Main Applications

  • Radio communication and other military applications
  • Alarms and security systems
  • Beacons and emergency location transmitters
  • GPS
  • Metering systems
  • Sonobuoys
  • LED lighting applications
  • Memory backup for computers
  • Others

  • Lithium Thionyl Chloride has the highest energy density of any practical Lithium battery chemistry, three times greater than Alkaline (Zinc Manganese Dioxide) batteries.

⚠️  Warning

  • This is not rechargeable battery. Do not try to recharge it
  • The storage area should be clean, cool (not exceeding +30 Deg C ), dry and ventilated
  • Do not use if the battery casing was mangled.
  • Please discharge the battery few minutes with 100mA,if the battery voltage is lower than your need or consult ABLE.
  • Don't use different models of battery in series.
  • Soldering the tag should be finished in few seconds.
  • This is not high drain battery, please don't use it for application with discrging current > 200mA