2 Bay 9 Volt Li-Ion / Li-Po Smart Charger + 4 x 9 Volt Lithium Polymer Batteries (720 mAh)



(No reviews yet) Write a Review
9 Volt
Lithium Polymer
9 Volt
Snap Connector
Adding to cart… The item has been added
Qty. Price
Product Specifications

Charger Specifications

  • Specially designed for 9 Volt Li-Ion and Lithium Polymer Rechargeable Batteries
  • Input: 100 - 240 VAC 50/60 Hz
  • Output: DC 12V 400 mAh
  • Charge Current: 200-300mA
  • Dimensions: 2.9" (75mm)L x 2.7" (70mm) W x 1.25" (32mm) H + Adapter
  • Weight: 4.24 oz (120 g)

Charger Features

  • Can charge 1 or 2 Batteries at a time
  • Multi Voltage for International Travel
  • Built in IC to cut off power automatically when battery is fully charge
  • Smart Charger Technology
  • Bad Battery Detection - LED will flash if inserted battery is defective
  • Includes External AC Adapter
  • Red LED indicate battery is charging, and Green LED shows full. (LED also is Green without battery)
  • Compact size and lightweight easy to carry for RC air/car
  • CE and ROHS Compliant

Battery Specifications

  • Size: 9 Volt
  • Capacity: 720 mAh
  • Chemistry: Lithium-Polymer
  • Voltage: 8.4 Volt
  • Brand: Hitech
  • Included Qty: 4

Battery Features

  • No memory effect
  • Built in PCB inside battery to protect battery from overcharging and over discharging
  • Long-Lasting Performance
  • Self-discharge is minimal,at less than 10% per month
  • Recharges up to 700 Cycles
  • Saves you hundreds of dollars compared to Alkaline batteries
  • Can be replaced in any product that uses 9 Volt Batteries

️  Warning

  • You must use our Li-Ion/ Li-PO Chargers to recharge this battery. Charging time is about 2.5 hours. Please never use a 9V NiMH battery charger to charge the Li-PO battery. This may cause battery to explode.

2 Bay 9 Volt Li-Ion / Li-Po Smart Charger + 4 x 9 Volt Lithium Polymer Batteries (720 mAh)

The 2 Bay 9 Volt Li-Ion / Li-Po Smart Charger is specifically designed to charge 9 Volt Li-Ion and Lithium Polymer rechargeable batteries. It features a versatile input range of 100 - 240 VAC 50/60 Hz, making it suitable for international travel. The charger has an output of DC 12V 400 mAh and a charge current of 200-300mA.


This smart charger is equipped with built-in technology that automatically cuts off power when the battery is fully charged, ensuring safe and efficient charging. It also has a bad battery detection feature, indicated by a flashing LED, which alerts you if a defective battery is inserted.


The charger includes an external AC adapter for convenient power supply. The charging status is indicated by a red LED during charging and a green LED when the battery is fully charged. The compact and lightweight design of the charger makes it easy to carry, making it suitable for RC air/car applications.


Included with the charger are four 9 Volt Lithium Polymer batteries from Hitech. These batteries have a capacity of 720 mAh and operate at a voltage of 9 Volts. They are built with a PCB (printed circuit board) inside the battery to protect against overcharging and over-discharging.


The 9 Volt Lithium Polymer batteries have no memory effect and offer long-lasting performance. With minimal self-discharge of less than 10% per month, they can be stored for extended periods without losing their charge. These batteries can be recharged up to 700 cycles, providing cost savings compared to disposable alkaline batteries. They are compatible with any device that uses 9 Volt batteries.


Get the 2 Bay 9 Volt Li-Ion / Li-Po Smart Charger with 4 x 9 Volt Lithium Polymer Batteries for reliable and convenient charging of your 9 Volt rechargeable batteries, ensuring continuous power for your devices.