6-Pack 3.6 Volt ER34615 (SAFT LSH20) D Primary Lithium Batteries (19000 mAh)

SKU:25992

Power Portable

$187.19
(No reviews yet) Write a Review
SKU:
25992
UPC:
628848145099
Size:
D
Chemistry:
Lithium Thionyl Chloride
Voltage:
3.6 Volt
Terminal:
Button Top
Rechargeable:
No
ecotax_id:
18
ecotax_qty:
6
Size:
ER34615
Size:
LSH20
Adding to cart… The item has been added
Qty. Price

Compatible Products

Product Specifications

Electrical characteristics

  • Chemistry: Lithium Thionyl Chloride
    Brand: Power Portable
  • Nominal Capacity: 19 Ah ( 19000 mAh)
  • Open Circuit Voltage: (at +20C +68F) 3.66 Volt
  • Nominal Voltage: (at 1mA +20C +68F) 3.6 Volt
  • Max. Continuous Current: 200mA Max
  • Pulse Current: Up to 400mA
  • Storage (recommended): +30C +86 F max
  • Operating Temperature Range: -55C / +85C
  • Diameter (max): 34.2 mm(1.4")
  • Height (max): 61.5 mm(2.46")
  • Typical Weight: 110g (3.6 oz)
  • UL Approved --- BBCV2.MH30127
  • Quantity: 6 pcs

Features

  • Lithium Thionyl Chloride has the highest energy density of any practical Lithium battery chemistry, three times greater than Alkaline (Zinc Manganese Dioxide) batteries
  • Widest operating temperature range of -76F to + 185 F
  • Self discharge is low at less than 1% per annum at +68F, giving an effective shelf life of 10 years
  • Non-flammable electrolyte

Main applications

  • Radiocommunication and other military applications
  • Alarms and security systems
  • Beacons & emergency location transmitters
  • GPS
  • Metering systems
  • Memory back up
  • Sonobuoys
  • LED lighting applications

Equivalent Batteries

  • ER34615H
  • ER34615C
  • ER34615M
  • LSH20
  • LS33600
  •  
  •  

⚠️Warning

  • This is a non-rechargeable Lithium battery
  • This is not a high drain battery, please don't use it for the applications with discharging current > 200 mA
  • The storage area should be clean, cool (not exceeding +30 Deg C ), dry and ventilated
  • Do not use if the battery casing is damaged
  • Please discharge the battery few minutes with 100mA, if the battery voltage is lower than your need
  • Don't use different models of battery in series
  • Soldering the tab should be finished in a few seconds.