- Input 12V DC ( Car battery or 12 DC power supply )
- Smart DC charger allows you to charge NiMH / NiCd battery pack from car battery
- Designed for charging 7.2V or 8.4V NiMH / NiCd battery pack > 600 mAh Capacity
- Brand: Tenergy
- Smart Charger Technology
- Negative delta V(-V) Cuts-off power automatically to ensure a full charge.
- Selectable Charging current: 1.3A or 3.2A Maximum timer control for overcharge protection
- Protection fuse for over current, short circuit & reverse polarity protection LED light to indicate fast charge & trickle charge
- Charging time from approx. 30 mins to 60 mins depending on the size /rated capacity of battery
- Includes Male Tamiya and Male Mini Tamiya connectors
- Weight: 9 oz, (255 g)
This 12V DC peak charger is designed for NiMH or NiCd battery packs rated at 7.2V or 8.4V and with a capacity greater than 600mAh. It takes power from a 12V DC input, such as a car battery or a 12V DC power supply, making it suitable where that type of source is available. Select between charging currents of 1.3A and 3.2A. The charger uses negative delta V (-V) detection to cut off power automatically, helping bring the charging cycle to completion without requiring continuous monitoring. These features make it a practical option for charging supported battery packs when a 12V DC source is available.
A maximum timer control adds overcharge protection, and a protection fuse is provided for overcurrent, short-circuit, and reverse-polarity conditions. An LED indicates fast-charge and trickle-charge status, so users can see which charging phase is indicated. The stated charging time is approximately 30 to 60 minutes, depending on the battery’s size and rated capacity, so actual time varies with the pack. The charger includes male Tamiya and male Mini Tamiya connectors. Its listed weight is 9 ounces (255 grams). Check that the battery chemistry, voltage, capacity, and connector match the charger’s supported specifications before use.
Common Applications:
- Charging 7.2V or 8.4V NiMH battery packs with a capacity greater than 600mAh.
- Charging 7.2V or 8.4V NiCd battery packs with a capacity greater than 600mAh.
- Use with a car battery or a 12V DC power supply as the charger's input source.
Also Known As / Replaces:
- Product SKU: 12536.
- 12 Volt DC Peak Charger for 7.2 - 8.4 Volt Battery Packs.
- No replacement or equivalent charger part numbers are provided.
Important Compatibility Note:
- This is a 12V DC-input charger designed for 7.2V or 8.4V NiMH or NiCd battery packs rated above 600mAh. The product information does not specify compatibility with other battery chemistries, voltages, or capacities.
- The charging current is selectable between 1.3A and 3.2A. Smart charger technology uses negative delta V (-V) cutoff to stop charging automatically; a maximum timer provides overcharge protection.
- Protection is specified for overcurrent, short circuit, and reverse polarity. LED indicators show fast-charge and trickle-charge status.
- Male Tamiya and Male Mini Tamiya connectors are included. Confirm that the battery pack's connector matches or can connect to one of these supplied connectors.
- Charging takes approximately 30 to 60 minutes depending on battery size and rated capacity.
- Exact compatible battery pack models are not listed. Exact compatibility details are not provided. Please confirm compatibility with the manufacturer before purchase.
Package Includes:
- Male Tamiya connector.
- Male Mini Tamiya connector.
- Packaging type and package quantity are not specified.
| Brand: | Tenergy |
| SKU: | 12536 |
| Product Type: | Smart DC battery charger |
| Input Voltage: | 12 V DC |
| Input Power Source: | Car battery or 12 V DC power supply |
| Supported Battery Chemistries: | NiMH and NiCd |
| Supported Battery Pack Voltage: | 7.2 V or 8.4 V |
| Supported Battery Capacity: | Greater than 600 mAh |
| Selectable Charging Current: | 1.3 A or 3.2 A |
| Charge Termination: | Negative delta V (-ΔV) cutoff |
| Automatic Charge Cutoff: | Automatically cuts off power |
| Overcharge Protection: | Maximum timer control |
| Overcurrent Protection: | Fuse protection |
| Short-Circuit Protection: | Yes |
| Reverse-Polarity Protection: | Yes |
| Charge Status Indicator: | LED indicates fast charge and trickle charge |
| Approximate Charging Time: | 30–60 minutes, depending on battery size and rated capacity |
| Included Connectors: | Male Tamiya and male Mini Tamiya |
| Weight: | 255 g (9 oz) |